Professional Gas Fitting Services in Northwest Washington
Gas Lines · Appliance Hookups · Leak Detection · BBQ Lines · Furnace Connections. Licensed gas fitters for every job in Bellingham, Mount Vernon & Anacortes.
Request Service: Use the form below or call 360-685-8098 today!
PROUDLY SERVING BELLINGHAM, MOUNT VERNON, AND ANACORTES FOR 30+ YEARS
Safe, Code-Compliant Gas Work for Every Job
Gas work is not a DIY project. Improper gas fitting causes leaks, explosions, carbon monoxide poisoning, and house fires. Whether you need a new gas line run to your kitchen range, a furnace hookup, or an outdoor BBQ connection — LaVergne's handles it safely. Our licensed gas fitters deliver code-compliant work across Whatcom and Skagit Counties.
We specialize in gas line installation & repair, appliance hookups, gas leak detection & repair, outdoor BBQ & fire pit lines, furnace & boiler connections, gas water heater hookups, and commercial gas fitting — serving homeowners and businesses throughout Bellingham, Mount Vernon, Anacortes, and surrounding areas.
What to Look for in a Gas Fitting Professional
Gas work is the most dangerous trade in plumbing. One bad connection causes leaks, explosions, carbon monoxide poisoning, and house fires. Never hire an unlicensed person for gas work — here's what to look for.
Why LaVergne's?
We check every box. Gas fitting since 1951.
- Licensed & Insured (#LAVERPH798NZ)
- 75+ Years of Gas Fitting
- Natural Gas & Propane
- Upfront, Honest Pricing Always
- 5-Star Safety Record
- 24/7 Gas Leak Emergency
Gas Fitting Services
Six specialized gas fitting service areas — from new gas line runs to emergency leak detection — for homes and businesses across the region.
Gas Line Installation
New gas line runs for kitchens, laundry rooms, garages, and additions. Properly sized black iron or CSST flex piping, pressure tested and inspected to code.
Schedule →Appliance Hookups
Gas range, dryer, furnace, boiler, fireplace, and water heater connections. Proper shut-off valve install, flex connector, and leak testing on every hookup.
Hook Up →Gas Leak Detection
Electronic leak detection, pressure testing, joint inspection, and emergency shut-off. If you smell gas, leave the building and call us immediately — 24/7.
Call Now →Outdoor Gas Lines
BBQ gas line runs, outdoor fire pit connections, patio heater hookups, and pool heater gas lines — properly buried, protected, and code-compliant.
Quote →Gas Line Repair
Corroded pipe replacement, damaged connector repair, leaking joint fixes, and re-piping of outdated gas systems to meet current code requirements.
Fix Now →Commercial Gas Fitting
Restaurant range hookups, commercial boiler connections, rooftop unit gas piping, and code-compliant commercial gas system installs and repairs.
Bid Request →Smell Gas? Get Out & Call Now.
24/7 gas leak emergency response across Bellingham, Mount Vernon, Anacortes & all surrounding areas.
Most Common Gas Fitting Jobs We Handle
Most gas fitting calls fall into one of four categories. Whether you're upgrading from electric to gas, adding an outdoor cooking setup, or dealing with a suspected leak — we handle it safely and to code.
Every gas job includes a full pressure test before we turn the gas on. We never rush gas work — your family's safety is the priority on every single job.
Electric to Gas Conversion
New gas line run from meter to appliance, shut-off valve, flex connector, and full pressure test for range or dryer conversions.
Quote →BBQ & Fire Pit Lines
Permanent outdoor gas line from your meter to your grill, fire pit, or patio heater — no more propane tanks to refill.
Install →Furnace & Boiler Hookup
Gas supply connection for new furnaces, boilers, and heating systems. Properly sized line, shut-off valve, and code inspection.
Connect →Gas Leak Emergency
24/7 response for suspected gas leaks. Electronic detection, isolation, repair, pressure test, and safety clearance before re-lighting.
Emergency →
Why Professional Gas Fitting Matters
Gas is the most dangerous utility in your home. A single improperly fitted joint can leak natural gas or propane into your living space — causing explosions, carbon monoxide poisoning, and fatal house fires. Every year, DIY gas work and unlicensed handyman installs cause preventable tragedies.
Licensed gas fitters pressure-test every connection, verify proper pipe sizing for BTU demand, install code-required shut-off valves, and ensure your gas system is safe before turning on a single appliance. There are no shortcuts with gas work.
Explosion Prevention
Every joint tested under pressure
CO Protection
Proper venting & combustion air
Code Compliance
WA state gas code certified
Gas Fitting FAQs
Common gas fitting questions answered by our licensed experts serving Whatcom & Skagit Counties.
Can I do gas work myself?
Absolutely not. Gas fitting requires a licensed professional by Washington state law. Improper gas work causes leaks, explosions, carbon monoxide poisoning, and house fires. Never attempt DIY gas work.
How much does a gas line installation cost?
A simple gas line run (under 25 feet) typically costs $300–$800. Longer runs, multiple appliances, or attic/crawlspace routing ranges $800–$2,500+. We always provide an upfront quote before starting.
Can you run a gas line for my BBQ?
Yes — we run permanent gas lines from your meter to outdoor grills, fire pits, and patio heaters. No more refilling propane tanks. Properly buried, protected, and code-compliant.
What should I do if I smell gas?
Leave the building immediately. Do not flip light switches, use phones, or start vehicles near the building. Once safely outside, call 911 first, then call us at 360-685-8098 for 24/7 emergency response.
Can you convert my electric range to gas?
Yes — we run a new gas line from your meter or nearest supply point to your kitchen, install a shut-off valve, connect the range with a proper flex connector, and pressure-test everything.
Do you work with propane systems too?
Yes — we install and repair both natural gas and propane systems. We handle propane appliance hookups, tank line connections, regulators, and conversions between fuel types.
How do you test gas lines for leaks?
We perform a pressure test on every gas system after installation or repair. The line is pressurized and held for a set duration — any pressure drop indicates a leak that we locate and fix before gas is turned on.
Can you hook up my gas fireplace or insert?
Yes — we connect gas fireplaces, inserts, and log sets. We run the gas line, install the shut-off valve, connect the unit, and verify proper venting and combustion air before lighting.
What areas do you serve for gas fitting?
We provide gas fitting services across all of Whatcom and Skagit Counties including Bellingham, Mount Vernon, Anacortes, Burlington, Sedro-Woolley, Ferndale, Lynden, and surrounding areas.